ООО "ПРОМЫШЛЕННАЯ АВТОМАТИЗАЦИЯ"
поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.

 

The LC5100 Bus Coupler is particularly suitable for use in small, low-price stations. The 24 V DC supply voltage feeds the peripheral devices via the power contacts, as well as the Bus Coupler electronics and the K-bus electronics. Electrical isolation from the I/O level is omitted from the Bus Coupler, but can if necessary be implemented by means of a power feed terminal.

The LC5100 Bus Coupler can be replaced by a Bus Coupler from the BK5110 series.

The BK51x0 Bus Couplers connect the CAN bus system to the electronic terminal blocks, which can be extended in modular fashion. One unit consists of one Bus Coupler, any number of up to 64 terminals and one end terminal. The BK5110 “Economy” variant permits particularly economical creation of peripheral interfacing connections. Up to 64 digital input/output terminals can be connected.

The particular feature for the BK4500 Bus Coupler is its fibre optic connection. Its functions correspond to those of the BK4000 Bus Coupler in relation to the Bus Terminals and the fieldbus properties. The fibre optics mean that the transmission is particularly safe from interference, and has absolute electrical isolation.

The LC3100 “Low Cost” Bus Coupler is marked by a smaller design and a more economical connection method. Its functions correspond to those of the PROFIBUS BK3110 Bus Coupler in relation to operation with Bus Terminals and to the fieldbus properties. Up to 64 digital input/output terminals can be connected. The firmware can be updated via the configuration interface.

The BK3500 Bus Coupler connects the PROFIBUS system to the electronic terminal blocks, which can be extended in modular fashion. One unit consists of the Bus Coupler, any number of up to 64 terminals and one end terminal.

The particular feature of the BK3500 Bus Coupler is its fibre optic connection. The fibre optics mean that the transmission is particularly safe from interference and has absolute electrical isolation.

The Bus Coupler recognises the connected Bus Terminals and automatically allocates them into the EtherCAT process image. The Bus Coupler is connected to the network via the upper Ethernet interface. The lower RJ 45 socket may be used to connect further EtherCAT devices in the same strand.

In the EtherCAT network, the BK1120 Bus Coupler can be installed anywhere in the Ethernet signal transfer section (100BASE-TX) – except directly at the switch. The Bus Coupler BK9000 (for K-bus components) is suitable for installation at the switch.

Страница 88 из 88
  Яндекс.Метрика