ТОВ "Промислова автоматизація" постачає промислове обладнання та електронні компоненти для автоматизації технологічних процесів, будівель і споруд, машинобудівних комплексів.

 

Контроллеры ввода-вывода сигналов с интерфейсами промышленных шин

Открытость и независимость периферийных устройств от выбора промышленной шины является основой системы ввода-вывода компании Beckhoff.

Главным устройством системы является контроллер ввода-вывода с интерфейсом промышленной шины, который позволяет подключать до 64 модулей обработки сигналов.

Модули, работающие с различными напряжениями, могут настраиваться, полностью заменяя использование механических блоков. Таким образом. уровни входных и выходных сигналов настраиваются так же, как на электронных модулях, независимо от типа промышленной шины.

The LC5100 Bus Coupler is particularly suitable for use in small, low-price stations. The 24 V DC supply voltage feeds the peripheral devices via the power contacts, as well as the Bus Coupler electronics and the K-bus electronics. Electrical isolation from the I/O level is omitted from the Bus Coupler, but can if necessary be implemented by means of a power feed terminal.

The LC5100 Bus Coupler can be replaced by a Bus Coupler from the BK5110 series.

The BK51x0 Bus Couplers connect the CAN bus system to the electronic terminal blocks, which can be extended in modular fashion. One unit consists of one Bus Coupler, any number of up to 64 terminals and one end terminal. The BK5110 “Economy” variant permits particularly economical creation of peripheral interfacing connections. Up to 64 digital input/output terminals can be connected.

The particular feature for the BK4500 Bus Coupler is its fibre optic connection. Its functions correspond to those of the BK4000 Bus Coupler in relation to the Bus Terminals and the fieldbus properties. The fibre optics mean that the transmission is particularly safe from interference, and has absolute electrical isolation.

The LC3100 “Low Cost” Bus Coupler is marked by a smaller design and a more economical connection method. Its functions correspond to those of the PROFIBUS BK3110 Bus Coupler in relation to operation with Bus Terminals and to the fieldbus properties. Up to 64 digital input/output terminals can be connected. The firmware can be updated via the configuration interface.

The BK3500 Bus Coupler connects the PROFIBUS system to the electronic terminal blocks, which can be extended in modular fashion. One unit consists of the Bus Coupler, any number of up to 64 terminals and one end terminal.

The particular feature of the BK3500 Bus Coupler is its fibre optic connection. The fibre optics mean that the transmission is particularly safe from interference and has absolute electrical isolation.

Страница 3 из 3
  Яндекс.Метрика