ТОВ "Промислова автоматизація" постачає промислове обладнання та електронні компоненти для автоматизації технологічних процесів, будівель і споруд, машинобудівних комплексів.


FC1121 | PCIe EtherCAT slave card


The FC1121 PCIe (PCI Express) EtherCAT card can be used to integrate a PC as a slave in an EtherCAT network. The card has an EtherCAT channel with two ports (IN/OUT) and is also supported in the ET9300 EtherCAT Slave Stack Code. The FC1121 can therefore also be used for the development of EtherCAT slave software on the PC.

The FC1121 can optionally be retrofitted with the FC600x NOVRAM cards in order to backup data on the NOVRAM. Three NOVRAM sizes are available: 128, 256 and 512 KB.


Technical data  
Fieldbus EtherCAT (direct mode)
EtherCAT plug 2 x RJ 45, EtherCAT IN/OUT
Data transfer rates 100 Mbit/s
Interface to the PC PCIe (PCI Express) interface
EtherCAT Slave Controller ET1100
RAM 8 kbyte
SYNC manager 8
Cable length up to 100 m
Hardware diagnosis 2 LEDs per channel (activity, link)
Dimensions approx. 100 mm x 130 mm
Operating temperature 0…+55 °C
Driver TwinCAT driver for EtherCAT, support in the EtherCAT Slave Stack Code ET9300



Ordering information  
FC1121 standard configuration



TwinCAT I/O I/O driver
Cordsets cordsets and connectors