ТОВ "Промислова автоматизація" постачає промислове обладнання та електронні компоненти для автоматизації технологічних процесів, будівель і споруд, машинобудівних комплексів.


The slotbox makes PCI Express and PCI slots available outside the IPC as well. The PCI Express bus is fed via a plug connector and cable to a slotbox located up to seven meters (23-ft) away. Users can use the installation space in the control cabinet fl exibly and locate further plug-in cards locally. Both PCI and PCI Express card slots are available by using different versions of the slotbox. The slotbox is made of sturdy aluminium and ideal for use in industrial environments.

The industrial grade CU8890 WLAN controller is based on the standard IEEE 802.11 b/g and is designed for DIN rail installation. Connected to an IPC it offers a fieldbus-independent data exchange. The data exchange module has a reverse SMA plug for connection of various radio antennas. The free choice of antenna enables adaptation to the respective environment. The outdoor range between two modules depends on the environment and can be up to 300 m. The CU8890 can be used either as access-point or as client. Status and data exchange are displayed via LEDs, thereby offering fast and simple diagnostics. Client drivers are available for Windows XP, Embedded Standard as well as Windows CE (from CE 6). With the drivers for Windows XP and Embedded Standard, the CU8890 can also operate as an access-point.

With the CU8880 USB-to-LAN adapter, Industrial PCs can be extended with an additional industrially-suited and independent Ethernet interface. The CU8880 is used for necessary IT communication. It is not suitable for EtherCAT or real-time Ethernet communication. However, the on-board Ethernet interfaces of the respective Industrial PCs are available for this. Drivers for the USB-to-LAN adapter are available for Windows XP Professional, Windows Embedded Standard and Windows CE.

The USB specification allows a distance of 5 m between the PC and the USB devices. A further 5 metres of cable can be added by using a USB hub. In the construction of machines and plants, larger distances must be bridged without having to insert a USB hub every 5 metres. The CU8800 USB Extender sends the USB signal via a CAT5 cable that can be up to 50 m long to the CU8850 USB Extended receiver, which converts the signal back to USB. Data rates of up to 12 Mbit/s can be transmitted. Both USB Extender boxes are designed for DIN rail mounting. The CU8800 transmitter is powered by the PC. The CU8850 receiver has an integrated 24 V DC power supply unit.

The CU8005 USB hub for DIN rail-mounting has four ports and supports the USB 2.0 data transfer rate of 480 Mbit/s, but is also compatible with slower USB standards. Whereas the USB standard prescribes a power supply of 5 V/0.5 A for each USB downstream output, the CU8005 even provides 5 V/1 A for each USB device. The CU8870 offers a Compact Flash socket with USB connector. The Compact Flash cards are hot-plug capable in the CU8870 and can hence be plugged and unplugged like removable data storage devices for exchanging data with other PCs during operation. Together with the CU8800 and the CU8850, this CF socket can be mounted on a DIN rail at a distance of up to 50 m from the PC. The CU8871 offers a CFast socket with USB connector in a compact housing for DIN rail mounting. CFast Flash cards are used in the industrial environment as data memory for process and control data. The CFast cards are hot-plug capable in the CU8871 and can hence be plugged and unplugged like removable data storage devices for exchanging data with other PCs during operation. The USB 3.0 connection offers the highest data transfer rate possible with a CFast card, but the CFast adapter can also be connected to PCs with a USB 2.0 interface. Power is also supplied via USB. Status LEDs indicate whether the CU8871 is connected in addition to indicating data accesses and providing information on the write protection of the inserted CFast card.

Страница 1 из 2