ООО "ПРОМЫШЛЕННАЯ АВТОМАТИЗАЦИЯ"
поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.

 

The EL5151/EL5152 EtherCAT Terminal is an interface with 24 V inputs for the direct connection of incremental encoders. With the EL5151, a 32 bit counter with a quadrature decoder and a 32 bit latch for the zero pulse can be read, set or enabled. Alternatively, the EL5151 can be used as up/down counter terminal with gate.

The EL5101 EtherCAT Terminal is an interface for the direct connection of incremental encoders with differential inputs (RS485). A 32/16 bit counter with a quadrature decoder and a 32/16 bit latch for the zero pulse can be read, set or enabled. Incremental encoders with alarm outputs can be connected at the interface’s status input. Interval measurement with a resolution of up to 100 ns is possible. The gate input allows the counter to be halted. The counter state is taken over with a rising edge at the latch input.

The EL5021 SinCos EtherCAT Terminal serves as interface for the direct connection of a measuring sensor, e.g. a measuring probe with sinusoidal voltage output 1 Vss to the higher-level fieldbus. The measuring signal is processed, interpolated and made available as a 32 bit value. The signal period resolution is 13 bit. The reference mark is also stored in a 32 bit value. The current count and the reference mark value can be read. The input frequency for the measuring signal inputs is 250 kHz. The EL5021 deals with offset, gain and phase error compensation.

The EL5001 SSI interface EtherCAT Terminal allows an SSI encoder to be connected directly, whereas the EL5002 2-channel SSI interface EtherCAT Terminal allows the direct connection of two SSI encoders. The interface circuit generates a pulse for reading the encoder and makes the incoming data stream available to the controller as a data word in the process image. Various operating modes, transmission frequencies and bit widths can be permanently stored in a control register.

  Яндекс.Метрика