ООО "ПРОМЫШЛЕННАЯ АВТОМАТИЗАЦИЯ"
поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.

 

The terminal module EM2042 combines 16 digital outputs in a D-sub plug connector in a compact design with high packing density. The binary control signals are transferred (electrically isolated) to the actuators at the process level. Like the standard Bus Terminals, the terminal modules are integrated in the I/O system. Plug X2 included in the scope of supply.

The EL7041 EtherCAT Terminal is intended for Stepper Motors with medium performance range. The PWM output stages cover a wide range of voltages and currents. Together with two inputs for limit switches, they are located in the EtherCAT Terminal. The EL7041 can be adjusted to the motor and the application by changing just a few parameters. 64-fold micro-stepping ensures particularly quiet and precise motor operation. Together with a Stepper Motor, the EL7041 represents an inexpensive small servo axis. The EL7041 Stepper Motor terminal can be adjusted to the motor used by changing just a few parameters.

The EL2934 PROFIsafe EtherCAT Terminal is a digital output terminal with four channels. It switches 24 V DC actuators with up to 0.5 A current per channel. If the EtherCAT Terminal detects a fault, it switches off automatically (fail stop). The EL2934 meets the requirements of IEC 61508 SIL 3 and DIN EN ISO 13849 PLe.

The EL2904 safety EtherCAT Terminal is a digital output terminal with four channels. It switches 24 V DC actuators with up to 0.5 A current per channel. If the EtherCAT Terminal detects a fault, it switches off automatically (fail stop). The EL2904 meets the requirements of IEC 61508 SIL 3 and DIN EN ISO 13849 PLe.

The EL2902 safety EtherCAT Terminal is a digital output terminal with two channels. It switches 24 V DC actuators with up to 2.3 A current per channel. If the EtherCAT Terminal detects a fault, it switches off automatically (fail stop). The EL2902 meets the requirements of IEC 61508 SIL 3 and DIN EN ISO 13849 PLe.

The EL2889 digital output terminal connects the binary control signals from the automation device on to the actuators at the process level with electrical isolation. The EL2889 is protected against polarity reversal and processes load currents with outputs protected against overload and short-circuit. The EtherCAT Terminal contains 16 channels, whose signal states are displayed by LEDs. The terminal is particularly suitable for space-saving use in control cabinets. The connection technology is particularly suitable for single-ended inputs. All components have to use the same reference point as the EL2889. The power contacts are looped through.

The EL2872 digital output terminal offers a very compact design with its 16 channels. A 20-pin connector enables the secure connection of plug connectors using insulation displacement contact, as is usual for ribbon cables and special round cables. This significantly simplifies the wiring of many channels. State-of-the-art output drivers guarantee minimum power dissipation. 16 LEDs display the logical signal states of the outputs.

The EL2809 digital output terminal connects the binary control signals from the automation device on to the actuators at the process level with electrical isolation. The EL2809 is protected against polarity reversal and processes load currents with outputs protected against overload and short-circuit. The EtherCAT Terminal contains 16 channels, whose signal states are displayed by LEDs. The terminal is particularly suitable for space-saving use in control cabinets. The connection technology is particularly suitable for single-ended inputs. All components have to use the same reference point as the EL2809. The power contacts are looped through.

The EL2808 digital output terminal connects the binary control signals from the automation device on to the actuators at the process level with electrical isolation. The EL2808 is protected against polarity reversal and processes load currents with outputs protected against overload and short-circuit. The EtherCAT Terminal contains eight channels, consisting of a signal output and 0 V DC. The signal states are displayed by LEDs. The power contacts are looped through.

The digital EL2798 EtherCAT Terminal provides eight switches that can be used like a relay contact for AC/DC voltages. The electronic switch is realised through high-performance MOSFET transistors with low switch-on resistance. The switch itself is not short-circuit-proof, but due to its high pulse current capability it can cope with current until the fuse triggers a switch-off. Inductive loads can be switched directly, without further safety measures. High peak voltages and electromagnetic interference pulses are prevented.

Страница 1 из 3
  Яндекс.Метрика