ООО "ПРОМЫШЛЕННАЯ АВТОМАТИЗАЦИЯ"
поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.

 

FC5121, FC5122 | PCIe CANopen

The FC512x PC plug-in cards link the PC (PCI Express) to a CANopen network. They optionally act as network master or slave. In addition, general CAN messages can be sent or received – without having to bother with CAN frames in the application program. The cards provide a powerful implementation of the protocol, offering many desirable features:

  • All CANopen PDO communication types are supported: event driven, time driven (using an event timer), synchronous, polling.
  • individual monitoring of the process data objects
  • synchronisation with the PC controller’s task cycle
  • SDO parameter communication at start-up and run-time
  • emergency message handling
  • Guarding and Heartbeat
  • boot-up according to DS302
  • powerful parameter and diagnostics interfaces
  • The error management for each bus user is freely configurable.
  • It is possible to read the bus configuration and the node parameters.
  • online bus load display

In TwinCAT, all functions are conveniently available. The PCIe fieldbus cards offer the possibility of optionally adding a NOVRAM card (FC600x). The fieldbus cards automatically recognise the connection of these memory cards, which can also be plugged into the card later. The FC600x cards offer simple data backup on the NOVRAM memory and are available from 128 to 512 KB.

 

Technical data FC5121 FC5122
Fieldbus CANopen
Number of fieldbus channels 1 2
Data transfer rates 10, 20, 50, 100, 125, 250, 500, 800, 1,000 kbaud
Interface to the PC PCIe (PCI Express) interface
Bus interface 1 x D-sub socket, 9-pin, galvanically decoupled 2 x D-sub socket, 9-pin, galvanically decoupled
Communication CANopen network master and CANopen manager
Bus device per channel: max. 127 slaves
Termination resistor switchable
Hardware diagnosis 2 LEDs per channel
Bit width in the process image total max.: 4 kbyte input and output data
Dimensions approx. 100 mm x 130 mm
Operating temperature 0…+55 °C
Driver TwinCAT 2.11 R3 and higher
Accessories  
TwinCAT I/O I/O driver
Cordsets cordsets and connectors
FC6000 NOVRAM card, 128 KB
FC6001 NOVRAM card, 256 KB
FC6002 NOVRAM card, 512 KB
System  
CANopen For further CANopen products please see the system overview.
Product announcement
estimated market release 1st quarter 2012

 

  Яндекс.Метрика