ООО "ПРОМЫШЛЕННАЯ АВТОМАТИЗАЦИЯ"
поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.

 

EP2809-002x | 16-channel digital output 24 V DC, IMAX = 0.5 A (∑ 4 A)

 

The EP2809 EtherCAT Box with digital outputs connects the binary control signals from the controller on to the actuators at the process level. The 16 outputs handle load currents of up to 0.5 A each, although the total current is limited to 4 A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time, or in which not all of the actuators draw 0.5 A current.

The signal state is indicated by means of light emitting diodes. The signals are optionally connected via M8 (EP2809-0021) or M12 (EP2809-0022) screw type connectors. All outputs are short-circuit-proof and protected against inverse connection.

 

Technical data EP2809-0021 EP2809-0022
Number of outputs 16
Output connections M8, screw type M12, screw type
Protocol EtherCAT
Load type ohmic, inductive, lamp load
Nominal output voltage 24 V DC (-15 %/+20 %)
Max. output current 0.5 A each channel, individually short-circuit-proof, total current max. 4 A
Short circuit current max. 1.5 A
Distributed clocks
Auxiliary power current typ. 20 mA + load
Current consumption from US (without sensor current) 130 mA
Power supply connection feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Bit width in the process image 16 outputs
Electrical isolation 500 V
Weight approx. 250 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable

 

  Яндекс.Метрика