ТОВ "Промислова автоматизація" постачає промислове обладнання та електронні компоненти для автоматизації технологічних процесів, будівель і споруд, машинобудівних комплексів.


EL6692 | EtherCAT bridge terminal

The EtherCAT bridge terminal EL6692 enables data exchange between EtherCAT strands with different masters. It also enables synchronisation of the distributed clocks of the individual strands. The power supply on the primary side (E-bus) comes from the E-bus, on the secondary side (RJ 45) via an external connection. If several EL6692 are used, data traffic to the terminals on the other side can continue in the event of a power supply failure on one side. The bridge terminal can also be used for integrating a subordinate PC system as an EtherCAT slave.

Technical data EL6692
Technology primary side: E-bus (terminal strand), secondary side: 2 x 100 Mbit/s Ethernet, RJ 45, In/Out
Ports primary: E-bus, secondary: 2 x RJ 45 EtherCAT input/output
Function EtherCAT distributed clock synchronisation, data exchange (synchronous, ADS)
Cable length 100 m 100BASE-TX, secondary port
Hardware diagnosis status LEDs
Power supply primary: via the E-bus, secondary: via connector
Distributed clocks yes
Electrical isolation 500 V (E-bus/secondary side)
Current consumption E-bus: 120 mA; external: 60 mA/24 V (see documentation)
Bit width in the process image 16 bit SYNC input + IO input/output, max. 480 bytes in each direction
Current consumption power contacts
Current consumption E-bus E-bus: 120 mA, external: 60 mA/24 V typ.
Special features usable in TwinCAT as a reference clock, up to 480 byte asynchronous data transfer in each direction, supports ADS over EtherCAT (AoE)
Weight approx. 85 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals CE, Ex