ООО "ПРОМЫШЛЕННАЯ АВТОМАТИЗАЦИЯ"
поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.

 

EL3204 | 4-channel input terminal PT100 (RTD) for resistance sensors, 16 bit, 2-wire system

The EL3204 analog input terminal allows resistance sensors to be connected directly. The EtherCAT Terminal circuit can operate sensors using the 2-wire technique. A microprocessor handles linearisation across the whole temperature range, which is freely selectable. The EtherCAT Terminal’s standard settings are: resolution 0.1 °C in the temperature range of PT100 sensors. Sensor malfunctions such as broken wires are indicated by error LEDs.

Technical data EL3204 | ES3204
Number of inputs 4
Power supply via the E-bus
Distributed clocks
Input filter limit frequency typ. 1 kHz
Sensor types PT100, PT200, PT500, PT1000, Ni100, Ni120, Ni1000 resistance measurement (e.g. potentiometer, 10 Ω…1.2/4 kΩ), KTY sensors
Connection method 2-wire
Conversion time approx. 85 ms default setting, 2…800 ms configurable
Measuring current ≤ 0.5 mA (load-dependent)
Temperature range -200…+850 °C (PT sensors); -60…+250 °C (Ni sensors)
Resolution 0.1 °C per digit
Measuring error ≤ ±0.5 °C for PT sensors
Electrical isolation 500 V (E-bus/signal voltage)
Current consumption power contacts
Current consumption E-bus typ. 190 mA
Bit width in the process image 4 x 32 bit RTD input
Special features integrated digital filter, limit value monitoring, variable connection technology
Weight approx. 60 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL, Ex

 

  Яндекс.Метрика