ТОВ "Промислова автоматизація" постачає промислове обладнання та електронні компоненти для автоматизації технологічних процесів, будівель і споруд, машинобудівних комплексів.


EL2602, EL2612, EL2622 | 2-канальный модуль релейных выходов

The EL2602, EL2612 and EL2622 output terminals have two relays each of which has a single contact. The relay contact is connected to the power contacts, which are suitable for use at up to 230 V AC, and can be generally used for switching devices requiring mains power. The EtherCAT Terminals indicate their signal state by means of light emitting diodes. The EL2612 and EL2622 have potential-free contacts. The power contacts are not looped through.

Technical data EL2602 | ES2602 EL2612 | ES2612 EL2622 | ES2622
Connection technology relay output
Number of outputs 2 x make contacts for power contact 2 x change-over 2 x make contacts
Rated load voltage 230 V AC/30 V DC 125 V AC/30 V DC 230 V AC/30 V DC
Load type ohmic, inductive, lamp load ohmic ohmic, inductive, lamp load
Distributed clocks
Ohmic switching current 5 A AC/DC 0.5 A AC/2 A DC 5 A AC/DC
Inductive switching current 2 A AC/DC no data 2 A AC/DC
Minimum permitted load 10 mA at 5 V DC 10 µA at 10 mV DC with intact contact coating 10 mA at 5 V DC
Lamp test, electronic ballast 4 x 58 W 4 x 58 W
Current consumption E-bus typ. 170 mA typ. 150 mA typ. 170 mA
Electrical isolation 500 V (E-bus/field potential)
Current consumption power contacts
Bit width in the process image 2 outputs
Operating cycles mech. (min.) 2 x 10^7; 1 x 10^8 2 x 10^7
Operating cycles electr. (min.) 1 x 10^5 (5 A/30 V DC) 2 x 10^5 (1 A/30 V DC) 1 x 10^5 (5 A/30 V DC)
Configuration no address or configuration setting
Special features 1-wire connection possible signal relay
Weight approx. 50 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL