ООО "ПРОМЫШЛЕННАЯ АВТОМАТИЗАЦИЯ"
поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.

 

AG2200 | Planetary gear units for AM2000/AM3000/AM3500 Synchronous Servomotors

 

The compact, high-precision planetary gear units for the AM2000/AM3000/AM3500 Synchronous Servomotor range are used mainly in applications where large mass inertia has to be overcome, or where the inertia ratio between load and motor prevents dynamic motion. The inertia ratios, i.e. the required torques and motors can be calculated conveniently via the CYMEX calculation tool, which also offers an option for checking whether the selected motor can be adapted to the gear unit.

The planetary gear units are fitted to the respective motor in the factory and delivered as a complete motor/gear unit.

 

Features

  • maximum economic efficiency
    • low price
    • absolutely maintenance-free, thanks to unique lubrication concept
    • long service life (> 20,000 h)
  • high efficiency (> 95 % at full load)
  • maximum power density
  • low running noise and smooth operation through maximum production quality
  • suitable for cyclic or continuous operation
  • flexible mounting position
  • protection class IP 64
  • output shaft with feather key
  • 5 sizes 050…155
  • 12 gear ratios i = 3, 4, 5, 7, 10 (single-stage), i = 15, 16, 20, 25, 30, 35, 50, 70, 100 (two-stage)
  • acceleration torque between 11 and 450 Nm
  • maximum speed up to 8,000 rpm
  • low torsional backlash (≤ 8…15 arcmin)

Ordering informationRated torqueAcceleration torqueTorsional backlash standard/
reduced
Typ. combination with AM2000Typ. combination with AM3xxx
AG2200-+LP050-M01-x-w1y max. 5 Nm max. 12 Nm ≤ 12/10 arcmin AM227x/AM237x AM301x/AM302x
AG2200-+LP050-M02-x-w1y max. 5 Nm max. 12 Nm ≤ 15/13 arcmin AM227x/AM237x AM301x/AM302x
AG2200-+LP070-M01-x-w1y max. 18 Nm max. 35 Nm ≤ 12/8 arcmin AM237x/AM247x AM302x…AM3x4x
AG2200-+LP070-M02-x-w1y max. 18 Nm max. 35 Nm ≤ 15/10 arcmin AM237x/AM247x AM302x…AM3x4x
AG2200-+LP090-M01-x-w1y max. 45 Nm max. 90 Nm ≤ 12/8 arcmin AM247x/AM257x AM3x4x/AM3x5x
AG2200-+LP090-M02-x-w1y max. 45 Nm max. 90 Nm ≤ 15/10 arcmin AM247x/AM257x AM3x4x/AM3x5x
AG2200-+LP120-M01-x-w1y max. 110 Nm max. 220 Nm ≤ 12/8 arcmin AM257x/AM277x AM3x5x/AM3x6x
AG2200-+LP120-M02-x-w1y max. 110 Nm max. 220 Nm ≤ 15/10 arcmin AM257x/AM277x AM3x5x/AM3x6x
AG2200-+LP155-M01-x-w1y max. 320 Nm max. 450 Nm ≤ 12/8 arcmin AM277x/AM297x AM3x6x/AM307x
AG2200-+LP155-M02-x-w1y max. 320 Nm max. 450 Nm ≤ 15/10 arcmin AM277x/AM297x AM3x6x

M01: single-stage x = gear ratio 4, 5, 7, 10 (LP50); 3, 4, 5, 7, 10 (LP70…120); 5, 10 (LP155)

M02: two-stage x = gear ratio 16, 20, 25, 35, 50, 70, 100 (LP50); 15, 16, 20, 25, 30, 35, 50, 70, 100 (LP70…120); 25, 50, 100 (LP155)

w = 0: smooth shaft (only available with reduced backlash),

w = 1: shaft with groove and feather key

y = 0: reduced torsional backlash,

y = 1: standard torsional backlash

  Яндекс.Метрика