ООО "ПРОМЫШЛЕННАЯ АВТОМАТИЗАЦИЯ"
поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.

 

AM2xxx | Synchronous Servomotors

 

The AM2000 series of brushless Synchronous Servomotors are of outstanding quality; they are highly dynamic, the rotors have low moments of inertia, they have excellent rotational characteristics and impressive overload capacity. The Synchronous Servomotors, in connection with digital Servo Drives from the AX2000/AX2500 series, are excellently suited for positioning tasks that make high demands on dynamics and stability. The servomotor rotors are fitted with neodymium permanent magnets. This magnetic material is an important factor in making it possible to drive these motors in a highly dynamic fashion. The motors are fitted with two-pole hollow shaft resolvers and as an option may be obtained with a holding brake.

Temperature sensors in the stator windings and corresponding signal output via a zero-potential (break) contact monitor the coil temperature. The motors normally have an integrated resolver to provide feedback (optional single-turn or multi-turn absolute encoder). The Servo Drives evaluate the feedback signals and feed sine-wave currents to the motors.

The motors have angled connectors for the power supply and the feedback signals. Beckhoff offers the resolver, encoder and power leads as a ready-assembled accessory.

The motors are optionally available with an integrated stop brake. This holding brake (24 V DC) locks the rotor when power is removed. When the brake is released, the rotor can turn without residual torque. Operation is free from backlash. The stop brake can be driven directly by the Servo Drive.

Features

  • high dynamic performance caused by neodymium magnets
  • flange dimensions meet IEC standard, fit j6, accuracy according to DIN 42955,
  • tolerance class R
  • vibration class N according to DIN ISO 2373
  • insulation material class F according to DIN 57530
  • style IM B5 according to DIN 42950
  • shaft end without keyway to DIN 748
  • protection class IP 65
  • protection class IP 65, shaft feed through IP 54; optionally IP 65/IP 65
  • nominal mains voltage 400/460 V
  • long service life through brushless technology
  • integrated resolver
  • optional single-turn or multi-turn absolute encoder
  • optional special winding

AM2000-wxyzStandstill torqueStandstill currentRated speed at rated supply voltageRotor moment of inertiaWeight
230 V AC400/480 V AC
AM217S-0000 0.1 Nm 0.6 A 6000 min-1 0.06 kg cm² 0.7 kg
AM217M-0000 0.2 Nm 0.93 A 6000 min-1 0.12 kg cm² 0.8 kg
AM217S-2000 0.1 Nm 0.6 A 6000 min-1 0.06 kg cm² 0.7 kg
AM217M-2000 0.2 Nm 0.93 A 6000 min-1 0.12 kg cm² 0.8 kg
AM227M-wxy0 0.32 Nm 0.8 A 3000 min-1 4000 min-1 0.08 kg cm² 1.1 kg
AM227M-wxy1 0.32 Nm 0.8 A 3000 min-1 4000 min-1 0.15 kg cm² 1.4 kg
AM227L-wxy0 0.8 Nm 0.82 A 3000 min-1 4500 min-1 0.14 kg cm² 1.5 kg
AM227L-wxy1 0.8 Nm 0.82 A 3000 min-1 4500 min-1 0.21 kg cm² 1.8 kg
AM237S-wxy0 0.5 Nm 1A 4000 min-1 6000 min-1 0.45 kg cm² 1.9 kg
AM237S-wxy1 0.5 Nm 1 A 4000 min-1 6000 min-1 0.83 kg cm² 2.3 kg
AM237M-wxy0 1 Nm 1.6 A 4000 min-1 6000 min-1 0.7 kg cm² 2.3 kg
AM237M-wxy1 1 Nm 1.6 A 4000 min-1 6000 min-1 1.08 kg cm² 2.7 kg
AM237L-wxy0 1.5 Nm 1.6 A 3000 min-1 4000 min-1 1 kg cm² 2.9 kg
AM237L-wxy1 1.5 Nm 1.6 A 3000 min-1 4000 min-1 1.38 kg cm² 3.3 kg
AM247M-wxy0 2.5 Nm 1.78 A 1500 min-1 3000 min-1 1.4 kg cm² 3.3 kg
AM247M-wxy1 2.5 Nm 1.78 A 1500 min-1 3000 min-1 1.78 kg cm² 3.7 kg
AM247L-wxy0 3 Nm 2.3 A 1500 min-1 3000 min-1 1.6 kg cm² 3.5 kg
AM247L-wxy1 3 Nm 2.3 A 1500 min-1 3000 min-1 1.98 kg cm² 3.9 kg
AM257K-wxy0 2.6 Nm 1.9 A 1500 min-1 3000 min-1 2.1 kg cm² 4.5 kg
AM257K-wxy1 2.6 Nm 1.9 A 1500 min-1 3000 min-1 3.16 kg cm² 5.25 kg
AM257S-wxy0 4.6 Nm 2.8 A 1500 min-1 3000 min-1 3.1 kg cm² 5.7 kg
AM257S-wxy1 4.6 Nm 2.8 A 1500 min-1 3000 min-1 4.16 kg cm² 6.3 kg
AM257M-wxy0 8 Nm 4.3 A 1500 min-1 3000 min-1 4.5 kg cm² 7.6 kg
AM257M-wxy1 8 Nm 4.3 A 1500 min-1 3000 min-1 5.56 kg cm² 8.2 kg
AM257L-wxy0 9.5 Nm 6.1 A 1500 min-1 3000 min-1 6.5 kg cm² 8.7 kg
AM257L-wxy1 9.5 Nm 6.1 A 1500 min-1 3000 min-1 7.56 kg cm² 9.45 kg
AM277K-wxy0 11 Nm 6 A 1500 min-1 3000 min-1 12 kg cm² 9.8 kg
AM277K-wxy1 11 Nm 6 A 1500 min-1 3000 min-1 15.6 kg cm² 11.3 kg
AM277S-wxy0 17 Nm 10 A 1500 min-1 3000 min-1 18 kg cm² 14 kg
AM277S-wxy1 17 Nm 10 A 1500 min-1 3000 min-1 21.6 kg cm² 15.5 kg
AM277M-wxy0 22 Nm 13.7 A 1500 min-1 3000 min-1 13.1 kg cm² 17 kg
AM277M-wxy1 22 Nm 13.7 A 1500 min-1 3000 min-1 16.7 kg cm² 18.5 kg
AM297K-wxy0 26 Nm 16 A 1500 min-1 3000 min-1 82 kg cm² 28 kg
AM297K-wxy1 26 Nm 16 A 1500 min-1 3000 min-1 91.5 kg cm² 31.3 kg
AM297S-wxy0 32 Nm 20 A 1500 min-1 3000 min-1 104 kg cm² 32.5 kg
AM297S-wxy1 32 Nm 20 A 1500 min-1 3000 min-1 113.5 kg cm² 35.8 kg
AM297M-wxy0 40 Nm 23.4 A 1500 min-1 3000 min-1 139.4 kg cm² 40 kg
AM297M-wxy1 40 Nm 23.4 A 1500 min-1 3000 min-1 148.9 kg cm² 43.3 kg

Option w = 0: smooth shaft

w = 1: shaft with groove and feather key according to DIN 6885,

w = 2: connection cable with plug

Option x = 0: standard winding

x = 1: special winding

Option y = 0: resolver, 2-pole

y = 1: single-turn absolute encoder, Heidenhain EnDAT

absolute position within one revolution, electronic identification plate

AM227x: 512 sine periods per revolution

AM237x…AM297x: 2,048 sine periods per revolution

y = 2: multi-turn absolute encoder, Heidenhain EnDAT

absolute position within 4,096 revolutions, electronic identification plate

AM227x…AM297x: 512 sine periods per revolution

Option z = 0: without holding brake

z = 1: with holding brake

Special flange, special shaft and other accessories on request

 

Dimensions

Dimensionsabdk (without brake)k (with brake)lr
AM217S 25 mm 6 mm 16 mm 83 mm 32 mm 37 mm
AM217M 25 mm 6 mm 16 mm 99 mm 32 mm 37 mm
AM227M 40 mm 9 mm 20 mm 122 mm 155 mm 63 mm 55 mm
AM227L 40 mm 9 mm 20 mm 152 mm 185 mm 63 mm 55 mm
AM237S 60 mm 11 mm 23 mm 116 mm 149 mm 90 mm 75 mm
AM237M 60 mm 11 mm 23 mm 134 mm 167 mm 90 mm 75 mm
AM237L 60 mm 11 mm 23 mm 152 mm 185 mm 90 mm 75 mm
AM247M 80 mm 14 mm 30 mm 169 mm 173 mm 100 mm 88 mm
AM247L 80 mm 14 mm 30 mm 188 mm 221 mm 100 mm 88 mm
AM257K 95 mm 19 mm 40 mm 155 mm 190 mm 115 mm 105 mm
AM257S 95 mm 19 mm 40 mm 185 mm 220 mm 115 mm 105 mm
AM257M 95 mm 19 mm 40 mm 230 mm 265 mm 115 mm 105 mm
AM257L 95 mm 19 mm 40 mm 285.5 mm 318 mm 115 mm 105 mm
AM277K 130 mm 24 mm 50 mm 216 mm 259 mm 165 mm 142 mm
AM277S 130 mm 24 mm 50 mm 271 mm 314 mm 165 mm 142 mm
AM277M 130 mm 24 mm 50 mm 305 mm 348 mm 165 mm 142 mm
AM297K 180 mm 32 mm 58 mm 240 mm 284 mm 215 mm 190 mm
AM297S 180 mm 32 mm 58 mm 263 mm 307 mm 215 mm 190 mm
AM297M 180 mm 32 mm 58 mm 298 mm 342 mm 215 mm 190 mm
  Яндекс.Метрика