ООО "ПРОМЫШЛЕННАЯ АВТОМАТИЗАЦИЯ"
поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.

 

AM30xx | Synchronous Servomotors

 

Pole-wound motor series

For the AM3000 servomotors, the stator is not wound outside the housing but inside through a needle winder. With conventional technology, the winding is pressed into the grooved laminated core. This only achieves a copper filling ratio (which determines the maximum torque) of approx. 40 %. Furthermore, the insulation layer has to be significantly thicker in order to protect the wire from mechanical stress and prevent damage.

With pole winding, the copper wire is in close contact with the iron core. The wire insulation can be much thinner, since no pressing of the winding head is required. These measures lead to a significant increase in the proportion of “active“ copper, which determines the torque value, so that the performance of the AM3000 series is approx. 25–35 % higher. An additional benefit is that the motors are significantly shorter than conventional models.

 

Sealed winding

The AM3000 servomotors are characterised by an extremely low moment of inertia, robust design and high overload capacity. The winding is sealed in order to eliminate air between the individual wires, since the thermal resistance of air is higher than that of epoxy resin. This further increases mechanical resilience, e.g. in case of vibrations.

 

Single-piece motor housing

Servomotors dissipate a large proportion of the heat generated via the mounting flange. It is therefore important to keep the heat transfer resistance as small as possible. For this reason, the housings of the AM3000 motor series are made from a single piece, since material transitions increase the thermal resistance and have a negative influence on the stability of the motor.

The AM3000 Synchronous Servomotors are available with eight different flange sizes. For each size, once the flange size has been defined, there is scope for variation in the length. The motors are offered with torques between 0.18 and 180 Nm and with a wide range of nominal speeds, so that for each application and gear ratio the motor with the optimum dimensions can be selected.

 

Features

  • Rotable plug connectors: The plug connectors for power and feedback are freely rotatable, making wiring of the whole machine easier.
  • terminal box for AM308x
  • tight tolerances: resulting in a highly symmetric structure inside the motor reducing cogging to an absolute minimum
  • feedback option (similar to the AM2000 series): resolver, single-turn and multi-turn absolute encoders
  • The motors are available with smooth shaft or with groove and feather key.
  • protection class IP 65, shaft feed through IP 54, optional IP 65/IP 65
  • UL/CSA

 

Option

  • planetary gear units in different variants

AM30uv-wxyz-000a Stand-
still torque
Stand-
still current
Rated speed at rated supply voltage Rotor moment of inertia Weight
230 V AC 400 V AC 480 V AC (without brake) (with brake) (without brake) (with brake)
AM3011-wB00-0001 0.18 Nm 1.16 A 8000 min-1 0.017 kg cm² 0.35 kg
AM3012-wC00-0001 0.31 Nm 1.51 A 8000 min-1 0.031 kg cm² 0.49 kg
AM3013-wC00-0001 0.41 Nm 1.48 A 8000 min-1 0.045 kg cm² 0.63 kg
AM3013-wD00-0001 0.40 Nm 2.40 A 0.045 kg cm² 0.63 kg
AM3021-wCyz-000a 0.48 Nm 1.58 A 8000 min-1 0.107 kg cm² 0.118 kg cm² 0.82 kg 1.09 kg
AM3022-wCyz-000a 0.84 Nm 1.39 A 3500 min-1 8000 min-1 8000 min-1 0.161 kg cm² 0.172 kg cm² 1.10 kg 1.37 kg
AM3022-wEyz-000a 0.87 Nm 2.73 A 8000 min-1 0.161 kg cm² 0.172 kg cm² 1.1 kg 1.37 kg
AM3023-wCyz-000a 1.13 Nm 1.41 A 2500 min-1 5500 min-1 7000 min-1 0.216 kg cm² 0.227 kg cm² 1.38 kg 1.65 kg
AM3023-wDyz-000a 1.16 Nm 2.19 A 5000 min-1 8000 min-1 8000 min-1 0.216 kg cm² 0.227 kg cm² 1.38 kg 1.65 kg
AM3024-wCyz-000a 1.38 Nm 1.42 A 2000 min-1 4500 min-1 5500 min-1 0.270 kg cm² 0.281 kg cm² 1.66 kg 1.93 kg
AM3024-wDyz-000a 1.41 Nm 2.21 A 4000 min-1 8000 min-1 8000 min-1 0.270 kg cm² 0.281 kg cm² 1.66 kg 1.93 kg
AM3031-wCyz-0000 1.15 Nm 1.37 A 2500 min-1 5000 min-1 6000 min-1 0.330 kg cm² 0.341 kg cm² 1.55 kg 1.90 kg
AM3031-wEyz-0000 1.20 Nm 2.99 A 6000 min-1 0.330 kg cm² 0.341 kg cm² 1.55 kg 1.90 kg
AM3032-wCyz-0000 2.00 Nm 1.44 A 1500 min-1 3000 min-1 3500 min-1 0.590 kg cm² 0.601 kg cm² 2.23 kg 2.58 kg
AM3032-wDyz-0000 2.04 Nm 2.23 A 2500 min-1 5500 min-1 6000 min-1 0.590 kg cm² 0.601 kg cm² 2.23 kg 2.58 kg
AM3032-wHyz-0000 2,10 Nm 5.50 A 7000 min-1 0.590 kg cm² 0.601 kg cm² 2.23 kg 2.58 kg
AM3033-wCyz-0000 2.71 Nm 1.47 A 1000 min-1 2000 min-1 2500 min-1 0.850 kg cm² 0.861 kg cm² 2.90 kg 3.25 kg
AM3033-wEyz-0000 2.79 Nm 2.58 A 2000 min-1 4500 min-1 5000 min-1 0.850 kg cm² 0.861 kg cm² 2.90 kg 3.25 kg
AM3041-wCyz-0000 1.95 Nm 1.46 A 1200 min-1 3000 min-1 3500 min-1 0.810 kg cm² 0.878 kg cm² 2.44 kg 3.07 kg
AM3041-wEyz-0000 2.02 Nm 2.85 A 3000 min-1 6000 min-1 6000 min-1 0.810 kg cm² 0.878 kg cm² 2.44 kg 3.07 kg
AM3041-wHyz-0000 2.06 Nm 5.60 A 6000 min-1 6000 min-1 6000 min-1 0.810 kg cm² 0.878 kg cm² 2.44 kg 3.07 kg
AM3042-wCyz-0000 3.35 Nm 1.40 A 1500 min-1 2000 min-1 1.45 kg cm² 1.581 kg cm² 3.39 kg 4.02 kg
AM3042-wEyz-0000 3.42 Nm 2.74 A 1800 min-1 3500 min-1 4000 min-1 1.450 kg cm² 1.518 kg cm² 3.39 kg 4.02 kg
AM3042-wGyz-0000 3.53 Nm 4.80 A 3500 min-1 6000 min-1 6000 min-1 1.450 kg cm² 1.518 kg cm² 3.39 kg 4.02 kg
AM3043-wEyz-0000 4.70 Nm 2.76 A 1500 min-1 2500 min-1 3000 min-1 2.090 kg cm² 2.158 kg cm² 4.35 kg 4.98 kg
AM3043-wGyz-0000 4.80 Nm 4.87 A 2500 min-1 5000 min-1 6000 min-1 2.090 kg cm² 2.158 kg cm² 4.35 kg 4.98 kg
AM3043-wHyz-0000 4.82 Nm 5.40 A 3000 min-1 6000 min-1 2.090 kg cm² 2.158 kg cm² 4.35 kg 4.98 kg
AM3044-wEyz-0000 5.76 Nm 2.90 A 1200 min-1 2000 min-1 2500 min-1 2.730 kg cm² 2.798 kg cm² 5.30 kg 5.93 kg
AM3044-wGyz-0000 5.88 Nm 5.00 A 2000 min-1 4000 min-1 5000 min-1 2.730 kg cm² 2.798 kg cm² 5.30 kg 5.93 kg
AM3044-wHyz-0000 5.89 Nm 5.60 A 2500 min-1 5000 min-1 6000 min-1 2.730 kg cm² 2.798 kg cm² 5.30 kg 5.93 kg
AM3044-wJyz-0000 6.00 Nm 8.80 A 4000 min-1 6000 min-1 6000 min-1 2.730 kg cm² 2.798 kg cm² 5.30 kg 5.93 kg
AM3051-wEyz-0000 4.70 Nm 2.75 A 1200 min-1 2500 min-1 3000 min-1 3.420 kg cm² 3.593 kg cm² 4.20 kg 5.30 kg
AM3051-wGyz-0000 4.75 Nm 4.84 A 2500 min-1 5000 min-1 6000 min-1 3.420 kg cm² 3.593 kg cm² 4.20 kg 5.30 kg
AM3051-wHyz-0000 4.79 Nm 6.00 A 3000 min-1 6000 min-1 6000 min-1 3.420 kg cm² 3.593 kg cm² 4.20 kg 5.30 kg
AM3052-wGyz-0000 8.43 Nm 4.72 A 1500 min-1 2500 min-1 3000 min-1 6.220 kg cm² 6.393 kg cm² 5.80 kg 6.90 kg
AM3052-wHyz-0000 8.48 Nm 5.90 A 1800 min-1 3500 min-1 4000 min-1 6.220 kg cm² 6.393 kg cm² 5.80 kg 6.90 kg
AM3052-wKyz-0000 8.60 Nm 9.30 A 3000 min-1 5500 min-1 6000 min-1 6.220 kg cm² 6.393 kg cm² 5.80 kg 6.90 kg
AM3053-wGyz-0000 11.37 Nm 4.77 A 1000 min-1 2000 min-1 2400 min-1 9.120 kg cm² 9.293 kg cm² 7.40 kg 8.50 kg
AM3053-wHyz-0000 11.51 Nm 6.60 A 3000 min-1 3500 min-1 9.120 kg cm² 9.293 kg cm² 7.40 kg 8.50 kg
AM3053-wKyz-0000 11.60 Nm 9.40 A 2000 min-1 4000 min-1 4500 min-1 9.120 kg cm² 9.293 kg cm² 7.40 kg 8.50 kg
AM3054-wGyz-0000 14.30 Nm 5.00 A 1500 min-1 2000 min-1 11.92 kg cm² 12.093 kg cm² 9.00 kg 10.1 kg
AM3054-wHyz-0000 14.90 Nm 5.50 A 1000 min-1 1800 min-1 2000 min-1 11.92 kg cm² 12.093 kg cm² 9.00 kg 10.1 kg
AM3054-wKyz-0000 14.40 Nm 9.70 A 1800 min-1 3500 min-1 4000 min-1 11.92 kg cm² 12.093 kg cm² 9.00 kg 10.1 kg
AM3054-wLyz-0000 14.10 Nm 12.50 A 2500 min-1 4500 min-1 11.92 kg cm² 12.093 kg cm² 9.00 kg 10.1 kg
AM3062-wGyz-0000 11.90 Nm 4.90 A 1800 min-1 2000 min-1 16.9 kg cm² 17.51 kg cm² 8.90 kg 10.9 kg
AM3062-wHyz-0000 11.90 Nm 5.40 A 1000 min-1 2000 min-1 2400 min-1 16.90 kg cm² 17.51 kg cm² 8.90 kg 10.9 kg
AM3062-wKyz-0000 12.20 Nm 9.60 A 2000 min-1 3500 min-1 4500 min-1 16.90 kg cm² 17.51 kg cm² 8.90 kg 10.9 kg
AM3062-wMyz-0000 12.20 Nm 13.40 A 3000 min-1 6000 min-1 6000 min-1 16.90 kg cm² 17.51 kg cm² 8.90 kg 10.9 kg
AM3063-wKyz-0000 16.80 Nm 9.90 A 1500 min-1 3000 min-1 3500 min-1 24.20 kg cm² 24.81 kg cm² 11.1 kg 13.1 kg
AM3063-wMyz-0000 17.00 Nm 13.80 A 2000 min-1 4000 min-1 4500 min-1 24.20 kg cm² 24.81 kg cm² 11.1 kg 13.1 kg
AM3063-wNyz-0000 17.00 Nm 17.40 A 3000 min-1 5000 min-1 6000 min-1 24.20 kg cm² 24.81 kg cm² 11.1 kg 13.1 kg
AM3063-wHyz-0000 16.60 Nm 5.60 A 1500 min-1 1800 min-1 31.60 kg cm² 32.21 kg cm² 13.3 kg 15.3 kg
AM3064-wKyz-0000 20.80 Nm 9.20 A 1200 min-1 2000 min-1 2500 min-1 31.60 kg cm² 32.21 kg cm² 13.3 kg 15.3 kg
AM3064-wLyz-0000 21.00 Nm 12.80 A 1500 min-1 3000 min-1 3500 min-1 31.60 kg cm² 32.21 kg cm² 13.3 kg 15.3 kg
AM3064-wPyz-0000 20.40 Nm 18.60 A 2500 min-1 4500 min-1 5500 min-1 31.60 kg cm² 32.21 kg cm² 13.3 kg 15.3 kg
AM3065-wKyz-0000 24.80 Nm 9.80 A 1000 min-1 2000 min-1 2200 min-1 40.00 kg cm² 40.61 kg cm² 15.4 kg 17.4 kg
AM3065-wMyz-0000 25.00 Nm 13.60 A 1500 min-1 2500 min-1 3000 min-1 40.00 kg cm² 40.61 kg cm² 15.4 kg 17.4 kg
AM3065-wNyz-0000 24.30 Nm 17.80 A 2000 min-1 3500 min-1 4000 min-1 40.00 kg cm² 40.61 kg cm² 15.4 kg 17.4 kg
AM3065-wPyz-0000 24.50 Nm 19.80 A 2400 min-1 4000 min-1 5000 min-1 40.0 kg cm² 40.61 kg cm² 15.4 kg 17.4 kg
AM3072-wKyz-0000 29.70 Nm 9.30 A 1500 min-1 1800 min-1 64.50 kg cm² 66.14 kg cm² 19.7 kg 21.8 kg
AM3072-wMyz-0000 30.00 Nm 13.00 A 2000 min-1 2500 min-1 64.50 kg cm² 66.14 kg cm² 19.7 kg 21.8 kg
AM3072-wPyz-0000 29.40 Nm 18.70 A 1800 min-1 3000 min-1 3500 min-1 64.50 kg cm² 66.14 kg cm² 19.7 kg 21.8 kg
AM3072-wQyz-0000 29.70 Nm 20.90 A 3500 min-1 4000 min-1 64.50 kg cm² 66.14 kg cm² 19.7 kg 21.8 kg
AM3073-wMyz-0000 42.00 Nm 13.60 A 1500 min-1 1800 min-1 92.10 kg cm² 93.74 kg cm² 26.7 kg 28.8 kg
AM3073-wPyz-0000 41.60 Nm 19.50 A 1300 min-1 2400 min-1 2800 min-1 92.10 kg cm² 93.74 kg cm² 26.7 kg 28.8 kg
AM3073-wQyz-0000 41.60 Nm 24.60 A 3000 min-1 3500 min-1 92.10 kg cm² 93.74 kg cm² 26.7 kg 28.8 kg
AM3074-wLyz-0000 53.00 Nm 12.90 A 1200 min-1 1400 min-1 119.7 kg cm² 121.34 kg cm² 33.6 kg 35.7 kg
AM3074-wPyz-0000 52.50 Nm 18.50 A 1800 min-1 2000 min-1 119.7 kg cm² 121.34 kg cm² 33.6 kg 35.7 kg
AM3074-wQyz-0000 51.90 Nm 26.20 A 2500 min-1 3000 min-1 119.7 kg cm² 121.34 kg cm² 33.0 kg 35.7 kg
AM3082-wTyz-0006 75.00 Nm 48.00 A 2500 min-1 3000 min-1 172.0 kg cm² 177.00 kg cm² 65.0 kg 73.0 kg
AM3083-wTyz-0006 130.0 Nm 62.00 A 2200 min-1 2500 min-1 334.0 kg cm² 339.00 kg cm² 85.0 kg 93.0 kg
AM3084-wTyz-0006 180.0 Nm 67.00 A 1800 min-1 2000 min-1 495.0 kg cm² 500.00 kg cm² 105 kg 113 kg

u: flange code

v: motor length

 

Option w = 0: smooth shaft (preferred type)

w = 1: shaft with groove and feather key according to DIN 6885

w = 2: shaft with IP 65 sealing ring and smooth shaft

w = 3: shaft with IP 65 sealing ring and shaft with groove and feather key

Option x = winding code A…T

 

Option y = 0: resolver, 2-pole

y = 1: single-turn absolute encoder, Heidenhain EnDAT

absolute position within one revolution, electronic identification plate

AM302x…AM304x: 512 sine periods per revolution

AM305x…AM308x: 2,048 sine periods per revolution

y = 2: multi-turn absolute encoder, Heidenhain EnDAT

absolute position within 4,096 revolutions, electronic identification plate

AM302x…AM304x: 512 sine periods per revolution

AM305x…AM308x: 2,048 sine periods per revolution

y = 3: single-turn absolute encoder, Hengstler BiSS

absolute position within one revolution, electronic identification plate

AM302x…AM308x: 2,048 sine periods per revolution

y = 4: multi-turn absolute encoder, Hengstler BiSS

absolute position within 4,096 revolutions, electronic identification plate

AM302x…AM308x: 2,048 sine periods per revolution

 

Option z = 0: without holding brake

z = 1: with holding brake for AM302x…AM308x

 

Option a = 0: rotatable angular connectors for motor and feedback cable (only for AM302x up to AM307x)

a = 1: connection cable 0.5 m with non-detachable plugs (only for AM301x/AM302x), only for resolver

a = 3: vertical connectors for motor and feedback cables (only for AM302x up to AM307x)

a = 5: yTec plug (only for AM301x)

a = 6: motor connection via terminal box (only for AM308x)

 

Special flange, special shaft and other accessories on request

With the exception of the shaft seal, the options cannot be installed in the field. Options such as shaft seal, holding brake, EnDAT or BiSS can lead to a reduction of the nominal rating.

Dimensions

Dimensions a b d k (resolver) (without brake) k (resolver) (with brake) k (encoder) (without brake) k (encoder) (with brake) l r
AM3011 30 mm 8 mm 25 mm 69.6 mm 46 mm 40 mm
AM3012 30 mm 8 mm 25 mm 88.6 mm 46 mm 40 mm
AM3013 30 mm 8 mm 25 mm 107.6 mm 46 mm 40 mm
AM3021 40 mm 9 mm 20 mm 95.4 mm 129.5 mm 95.4 mm 129.5 mm 63 mm 58 mm
AM3022 40 mm 9 mm 20 mm 114.4 mm 148.5 mm 114.4 mm 148.5 mm 63 mm 58 mm
AM3023 40 mm 9 mm 20 mm 133.4 mm 167.5 mm 133.4 mm 167.5 mm 63 mm 58 mm
AM3024 40 mm 9 mm 20 mm 152.4 mm 186.5 mm 152.4 mm 186.5 mm 63 mm 58 mm
AM3031 60 mm 14 mm 30 mm 109.8 mm 141.3 mm 109.8 mm 141.3 mm 75 mm 70 mm
AM3032 60 mm 14 mm 30 mm 140.8 mm 172.3 mm 140.8 mm 172.3 mm 75 mm 70 mm
AM3033 60 mm 14 mm 30 mm 171.8 mm 203.3 mm 171.8 mm 203.3 mm 75 mm 70 mm
AM3041 80 mm 19 mm 40 mm 118.8 mm 152.3 mm 118.8 mm 152.3 mm 100 mm 84 mm
AM3042 80 mm 19 mm 40 mm 147.8 mm 181.3 mm 147.8 mm 181.3 mm 100 mm 84 mm
AM3043 80 mm 19 mm 40 mm 176.8 mm 210.3 mm 176.8 mm 210.3 mm 100 mm 84 mm
AM3044 80 mm 19 mm 40 mm 205.8 mm 239.3 mm 205.8 mm 239.3 mm 100 mm 84 mm
AM3051 110 mm 24 mm 50 mm 127.5 mm 172.5 mm 146.0 mm 189.0 mm 130 mm 108 mm
AM3052 110 mm 24 mm 50 mm 158.5 mm 203.5 mm 177.0 mm 220.0 mm 130 mm 108 mm
AM3053 110 mm 24 mm 50 mm 189.5 mm 234.5 mm 208.0 mm 251.0 mm 130 mm 108 mm
AM3054 110 mm 24 mm 50 mm 220.5 mm 265.5 mm 239.0 mm 282.0 mm 130 mm 108 mm
AM3062 130 mm 32 mm 58 mm 153.7 mm 200.7 mm 172.2 mm 219.7 mm 165 mm 138 mm
AM3063 130 mm 32 mm 58 mm 178.7 mm 225.7 mm 197.2 mm 244.7 mm 165 mm 138 mm
AM3064 130 mm 32 mm 58 mm 203.7 mm 250.7 mm 222.2 mm 269.7 mm 165 mm 138 mm
AM3065 130 mm 32 mm 58 mm 228.7 mm 275.7 mm 247.2 mm 294.7 mm 165 mm 138 mm
AM3072 180 mm 38 mm 80 mm 192.5 mm 234.5 mm 201.7 mm 253.7 mm 215 mm 188 mm
AM3073 180 mm 38 mm 80 mm 226.5 mm 268.5 mm 235.7 mm 287.3 mm 215 mm 188 mm
AM3074 180 mm 38 mm 80 mm 260.5 mm 302.5 mm 269.7 mm 321.3 mm 215 mm 188 mm
AM3082 250 mm 48 mm 110 mm 263.4 mm 329.4 mm 263.4 mm 329.4 mm 300 mm 260 mm
AM3083 250 mm 48 mm 110 mm 343.9 mm 410.0 mm 343.9 mm 410.0 mm 300 mm 260 mm
AM3084 250 mm 48 mm 110 mm 424.4 mm 490.4 mm 424.4 mm 490.4 mm 300 mm 260 mm
  Яндекс.Метрика