ООО "ПРОМЫШЛЕННАЯ АВТОМАТИЗАЦИЯ"
поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.

 

CX8010 | Embedded PC for EtherCAT

The CX8010 is a control system with EtherCAT slave interface, to which optional K-bus or E-bus terminals can be attached. The CX8010 automatically recognises the type of I/O system connected during the start-up phase. The control system is programmed with TwinCAT via the fieldbus interface or the additional Ethernet interface. The DIP switch enables fixed or automatic addressing in the EtherCAT network.

CX8010

 

Technical data CX8010
Processor 32 bit, 400 MHz
Flash memory 256 MB microSD (optionally 1 GB, 2 GB or 4 GB)
Internal main memory 64 MB RAM
Protocol EtherCAT (slave)
Programming TwinCAT PLC
Programming languages IEC 61131-3
Online change yes
Up/down load code yes/yes
Interfaces 1 x Ethernet 10/100 Mbit/s, 1 x USB device (behind the front flap)
Bus interface EtherCAT IN and OUT (2 x RJ 45)
I/O connection E-bus (EtherCAT Terminals) or K-bus (Bus Terminals), automatic recognition
Clock internal battery-backed clock for time and date (battery behind the front flap, exchangeable)
UPS 1-second UPS
Operating system Microsoft Windows CE
Web-based management yes
Current supply I/O terminals 2 A
Max. power loss 3 W
Dimensions (W x H x D) 65 mm x 100 mm x 80 mm
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protection class IP 20

 

  Яндекс.Метрика