ООО "ПРОМЫШЛЕННАЯ АВТОМАТИЗАЦИЯ"
поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.

 

KL9570, KS9570 | Buffer capacitor terminal

The KL9570 Bus Terminal contains high-performance capacitors for stabilising supply voltages. The KL9570 can be used in conjunction with KL2531/KL2541 stepper motor terminals and KL2532/KL2552 DC motor terminals. Low internal resistance and high-pulsed current capability enable good buffering in parallel with a power supply unit. Return currents are stored, particularly in the context of drive applications, thereby preventing overvoltages. If the regenerative energy exceeds the capacity of the capacitors, energy can be dissipated via an external ballast resistor.

Technical data  
Diagnostics
Nominal voltage 50 V
Capacity 500 µF
Ripple current 10 A in continuous operation
Internal resistance max 10 mΩ
Surge voltage protection min 56 V
Recommended ballast resistor 10 Ω, typ. 10 W
Overvoltage control range ±2 V
Ballast resistor clock rate load-dependent, 2-point control
Electrical isolation 1,500 V (terminal/K-bus)
Weight approx. 65 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals CE, Ex

 

  Яндекс.Метрика