ТОВ "Промислова автоматизація" постачає промислове обладнання та електронні компоненти для автоматизації технологічних процесів, будівель і споруд, машинобудівних комплексів.


KL6051, KS6051 | Data exchange terminal with serial interface

The KL6051 serial interface terminal makes it possible to exchange data between different fieldbus systems. Full duplex data exchange is possible, independently of the higher-level fieldbus. Under the terminal’s default setting, 32 inputs and 32 outputs are transferred between the fieldbus systems. The time to exchange the data is about 5 ms for 32 bits of I/O. The exchange of data with the Bus Coupler is indicated by the run LED. The TxD and RxD LEDs indicate the state of the signal transmission.


Technical data  
Technology 2 x RS422
Data transfer channels TxD and RxD, full duplex
Data transfer rates 62,500 baud, 32 bits bidirectional data exchange between two KL6051
Bit transfer via 2 pairs of twisted wires with differential signals
Line impedance 120 Ω
Cable length approx. 1,000 m twisted pair
Power supply via the K-bus
Current consumpt. K-bus typ. 65 mA
Current consumption power contacts – (no power contacts)
Electrical isolation 500 V (K-bus/signal voltage)
Data buffer 32 bit bidirectional
Bit width in the process image input/output: 4 x 8 bit user data, 1 x 8 bit control/status (up to 5 x 8 bit user data are possible)
Configuration no address or configuration setting
Special features automatic data exchange
Weight approx. 60 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals CE, UL, Ex