поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.


KL2701 | 1-channel solid state load relay up to 230 V AC/DC, 3 A

The KL2701 output terminal uses an electronic load relay to switch a mains voltage of up to 230 V AC/DC with an output current of 3 A. The switching element is a high-power MOSFET, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The KL2701 terminal has one independent output. Its signal state is indicated by means of a light emitting diode.

Technical data KL2701 | KS2701
Connection technology 2-/3-/4-wire
Number of outputs 1 make contact
Rated load voltage 0…230 V AC/DC
Load type ohmic, inductive
Max. output current 3 A steady load
Frequency range DC > 100 Hz
Surge voltage protection > 400 V AC
Peak current 5 A (20 s), 50 A (100 ms)
Recommended fuse ≤ 10 A fast fuse
Contact resistance 0.1 Ω typ.
Switch-off time 2…4 ms
Maximum residual voltage 100 mΩ
Electrical isolation 500 V (K-bus/field voltage), 2,500 V AC (1 min.)
Leakage current ≤ 1 mA (OFF state)
Switching speed typ. 1.65 ms, 5 ms max.
Current consumption power contacts only leakage and load current
Current consumpt. K-bus typ. 65 mA
Bit width in the process image 2 outputs
Configuration no address or configuration setting
Weight approx. 55 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals CE