ООО "ПРОМЫШЛЕННАЯ АВТОМАТИЗАЦИЯ"
поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.

 

KL2652 | 2-channel relay output terminal 230 V AC, 300 V DC, 1 A

The KL2652 output terminal has two relays, each featuring a change-over contact. The relay contact can be used universally for switching devices requiring mains power up to 230 V AC or 300 V DC. The KL2652 Bus Terminal is equipped with potential-free contacts. The signal state of the Bus Terminal is indicated via LEDs.

Technical data KL2652 | KS2652
Number of outputs 2 x change-over
Switching voltage max. 250 V AC, 300 V DC
Load type ohmic, inductive, lamp load
Max. output current 5 A
Switching current max. 1 A AC/1 A DC at 40 V DC; 0.15 A at 300 V DC (UL: max. 230 V AC, 1 A)
Minimum permitted load 100 mA (12 V DC)
Lamp test, electronic ballast max. 6 A starting current
Electrical isolation 1.5 kV (K-bus/field potential); 2.5 kV rated surge voltage, overvoltage category III
Current consumption power contacts – (no power contacts)
Current consumpt. K-bus typ. 90 mA
Bit width in the process image 2 outputs
Switching frequency max. 6/min. (at rated load)
Operating cycles mech. (min.) 5 x 10^6
Operating cycles electr. (min.) 1 x 10^6 (1 A/250 V AC)
Configuration no address or configuration setting
Special features reverse switching realisable
Weight approx. 55 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals CE

 

  Яндекс.Метрика