ТОВ "Промислова автоматизація" постачає промислове обладнання та електронні компоненти для автоматизації технологічних процесів, будівель і споруд, машинобудівних комплексів.


KL2641 | 1-channel relay output terminal 230 V AC, 16 A, manual operation, bistable

The KL2641 output terminal has a relay with a single contact which can be used universally for switching devices requiring mains power. The relay can optionally be switched in manual or automatic mode. The switch for the manual operation always indicates the switch status of the relay. The operating mode can be set via a manual/automatic switch, is displayed via an LED and transferred to the process image as a status bit. In manual mode, the coil control is interrupted and the relay is operated via the manual switch. The manual operation can also be used without 24 V supply for switching the actuator. In automatic mode, the relay is operated via the controller.

Technical data KL2641
Number of outputs 1 make contact
Switching capacity max. 5 kVA
Switching voltage max. 440 V AC (UL: max. 230 V AC)
Load type ohmic, inductive, lamp load
Max. output current 16 A
Switching current max. 16 A AC
Minimum permitted load
Lamp test, electronic ballast max. 16 A starting current
Current consumption power contacts typ. 65 mA + load
Current consumpt. K-bus typ. 5 mA
Contact material AgSnO2
Bit width in the process image 2 inputs (status manual, automatic), 2 outputs
Operating cycles 10^6
Operating cycles mech. (min.) 1 x 10^6
Operating cycles electr. (min.) no data
Configuration no address or configuration setting
Special features manual operation; bistable relay contact
Weight approx. 110 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals CE