ТОВ "Промислова автоматизація" постачає промислове обладнання та електронні компоненти для автоматизації технологічних процесів, будівель і споруд, машинобудівних комплексів.


KL2532 | 2-channel DC motor output stage 24 V DC, 1 A

The KL2532 Bus Terminal enables direct operation of two DC motors. It is galvanically isolated from the K-bus. The speed is preset by a 16 bit value from the automation unit. The output stage is protected against overload and short-circuit. The Bus Terminal contains two channels that indicate their signal state by means of light emitting diodes. The LEDs enable quick local diagnosis.

Technical data KL2532 | KS2532
Connection technology direct motor connection
Number of outputs 2 DC motors
Rated load voltage 24 V DC (-15 %/+20 %)
Load type DC brush motors, inductive
Max. output current 2 x 1 A (short-circuit-proof, thermal overload-proof for both channels together)
PWM clock frequency 30 kHz with 180° phase shift each
Duty factor 0…100 % (voltage-controlled)
Resolution max. 10 bits current, 16 bits speed
Reverse voltage protection
Electrical isolation 500 V (K-bus/field potential)
Current consumption power contacts typ. 30 mA + load
Current consumpt. K-bus typ. 50 mA
Encoder signal
Pulse frequency
Bit width in the process image 48 inputs/outputs: 2 x 16 bit data, 2 x 8 bit control/status
Configuration no address setting, configuration via Bus Coupler or controller
Weight approx. 55 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals CE

Related products  
KL2552 2-channel DC motor output stage 50 V DC, 5 A, Bus Terminal, IP 20
EL7332 2-channel DC motor output stage 24 V DC, 1 A, EtherCAT Terminal IP 20
EL7342 2-channel DC motor output stage 50 V DC, 3.5 A, EtherCAT Terminal, IP 20
EP7342 2-channel DC motor output stage 50 V DC, 3.5 A, EtherCAT Box, IP 67